The Diehl DPG-25 Profile Grinder was developed by Diehl Engineers after years of research.
Whether producing custom or high production mouldings, the unique features offer every size manufacturer advantages over competitive models. The most prominent feature of the DPG-25 is the “Point of Origin” grinding concept. Grinding is 5 times more accurate and wheel dressing is done 10 times faster than competitive models as a result of the advanced design.
Printable PDF report
Features
- Table Mounted Wheel Dressing System
- Eye-level Operator Controls
- Micron Finish on the Knife Cutting Edge
- Side Mounted Template System
Specifications
Table travel in X axis
|
12″
|
Table travel in Y axis
|
4″
|
Nominal knife bevel angle adjustment
|
35° to 65°
|
In/out adjustment of the grinding spindle
|
2″
|
Relief grinding angle adjustment
|
± 20°
|
RPM of the grinding spindle
|
500 – 3000
|
HP of the arbor motor
|
1 ½
|
Maximum cutterhead diameter
|
12″
|
Minimum cutterhead diameter
|
4″
|
Maximum cutterhead length
|
12″
|
Submersible coolant pump
|
w/ 15 Gallon tank
|
Dresser location
|
On the table
|
Micro-adjustable diamond dresser
|
Standard
|
X & Y table lock
|
Standard
|
Grinding wheel provided
|
6
|
Location of the template holder
|
Right side
|
Point of Origin grinding
|
Standard
|
Stylus sizes
|
2, 3, 4, mm, Vee angled
|
Maximum diameter of the grinding wheel
|
225 mm
|
Minimum diameter of the grinding wheel
|
160 mm
|
Grinding wheel bore
|
60 mm
|
Template X axis adjustment
|
mm micro adjust
|
Template Y axis adjustment
|
mm
|
Arm rest
|
Standard
|
Machine lamp
|
Standard
|
AC inverter drive
|
Standard
|
Axial constant grinding
|
Standard
|
Additional grinding wheel hubs
|
2
|
Grinding arbor included standard (specify diameter)
|
1
|
Coolant jets above and below tool rest
|
3
|
Size (with full table travel)
|
45″L x 85″W x 57″H
|
Weight
|
1400 lbs.
|